New Gold Target Outlined at Jotahues, Chile
Released
Released
Announcement PDF
Emu NL
New Gold Target Outlined at Jotahues Project
16 May 2018
New Gold Target Outlined at Jotahues, Chile
HIGHLIGHTS:
•
Soil geochemistry maps out strong geochemical anomaly at Peon 4, Jotahues Project
•
The survey outlined a cohesive zone of anomalous gold, silver, copper, mercury, and lead
geochemistry consistent with an epithermal system
•
The mapped zone is 600 x 1,200m. It is open to the north and south and is on strike from
Cacique, a reported Anglo American gold discovery
•
Testing by drilling is planned
SUMMARY
A follow-up grid-based soil geochemistry survey has been completed on the Peon 4 concession of
the Jotahues Project in the Maricunga Belt, Chile.
The survey has outlined a north-north-east trending mineralised zone of significantly elevated
geochemistry that remains open along strike to the north and south.
Soil geochemistry survey confirms earlier tallus results
Reconnaissance tallus geochemistry
results, announced on 26 February
2018, indicated a highly anomalous
geochemical zone from an area
designated “P4” (Peon 4 concession)
on the Jotahues Project. P4 is
approximately seven kilometres west
of Emu’s Vidalita Project and
represents a separate geological
target to Vidalita. The area was
selected for sampling based on
remote sensing information. That
geochemistry was anomalous in the
suite of elements indicating a possible epithermal system.
Surface samples from a 100m x 200m grid (closing up to 100 x 100m in some areas) have now been
collected and analysed. Figure 1 shows the extent of this survey.
Results, a summary of which is shown in Figure 2, map out a north-north-west striking zone
approximately 600m wide and a minimum 1,200m in strike length. This zone is open to the north
and south and lies on approximately the same trend as Anglo American’s Cacique gold discovery to
the north east.
Page 1 of 13
Emu NL
New Gold Target Outlined at Jotahues Project
16 May 2018
Going forward
It is planned to assess this new gold target with reconnaissance drilling next season. The extension
of the zone to the south will also be tested with further follow-up surface sampling.
Figure 1 Jotahues soil geochemistry coverage. P4 is the block in the central south.
Page 2 of 13
Emu NL
New Gold Target Outlined at Jotahues Project
16 May 2018
Figure 2 Jotahues soil geochemistry summary of results: gold (top left), mercury (top right), silver (bottom
left), and copper (bottom right). These and other assayed elements show a strong central north-trending zone
that support the existence of a mineralised epithermal system.
Investor enquiries
General Manager
T +61 8 9226 4266
E info@emunl.com.au
follow our sucess on twitter@emuasx
Page 3 of 13
Emu NL
New Gold Target Outlined at Jotahues Project
16 May 2018
About the Vidalita and Jotahues Gold Projects, Maricunga Belt, Chile
The Vidalita and Jotahues gold projects are located in the Maricunga gold belt in the Atacama Region
in northern Chile hosting numerous world class gold and silver projects. Emu’s projects cover an area
of approximately 6,900 hectares secured by mineral exploration concessions and host alteration and
mineralisation that appear geologically similar to other high sulphidation gold deposits of the
Maricunga gold belt. The projects are accessed using a network of roads that link Copiapó with the
Refugio project (Kinross), Cerro Casale project (Barrick/Goldcorp) and the Caspiche project
(Goldcorp). Refugio is located 30 km to the northwest of Vidalita.
The Company holds an option (Option) to acquire a 100% interest in certain of the Vidalita and
Jotahues concession packages from two Chilean companies.
The concessions are the subject of the Option comprise 2 packages: one package, (the Prospex SpA
concessions) covers six concessions at Vidalita, is subject to a 2% NSR on any production, and the
second package, (the BLC SpA concessions) comprised of three concessions at Jotahues and two
concessions at Vidalita (Vidalota A&B), is subject to a 1% NSR.
The Option will lapse if Emu fails to pay US$100,000 in November 2018. The Option may be
exercised in November 2019 on payment of US$2M following expenditure of US$1M, electing to
continue on or before November 2018 (by paying US$100,000 refer to above), the issue of 2.5M
Emu shares and then if Emu defines: (i) 0.5Moz of gold in measured resources, a further 5M ordinary
shares will be issued; and (ii) 1Moz of gold in measured resources, a further 5M ordinary shares will
be issued.
Emu continues to look for new mineral exploration, development and mining opportunities within
Australia and at various overseas jurisdictions.
Page 4 of 13
Emu NL
New Gold Target Outlined at Jotahues Project
16 May 2018
Emu NL
ABN 50 127 291 927
ASX Code: EMU
10 Walker Ave
West Perth, WA 6005
T +61 8 9226 4266
E info@emunl.com.au
PO Box 1112
West Perth, WA 6872
Fully paid shares (listed)
73,910,387 (inc. 4m which Emu can buy
back for nil consideration)
Contributing Shares (listed)
37,720,667 paid to $0.03, $0.03 to pay, no
call before 31/12/2018
Options (unlisted)
4,750,000, exercise price $0.10, expiring
20/12/18
2,000,000 exercisable (subject to minimum
share price milestones being met in the
case of 1,500,000 of these options) at
$0.11, expiring 20/12/18
300,000, exercise price $0.25, expiring
20/12/18
200,000, exercise price $0.10, expiring
30/6/18
Directors:
Peter Thomas
Non-executive Chairman
Greg Steemson
Managing Director
Gavin Rutherford
Non-Executive
COMPETENT PERSON’S STATEMENT
Any details contained herein that pertain to exploration
results, mineral resources or mineral reserves are based
upon information compiled by Mr Marcus Flis, General
Manager of Emu NL. Mr Flis is a Fellow of the
Australasian Institute of Mining and Metallurgy
(FAusIMM) and has sufficient experience in the
activity which he is undertaking to qualify as a
Competent Person as defined in the 2012 edition of the
“Australasian Code for Reporting of Exploration
Results, Mineral Resources and Ore Reserves” (JORC
Code). Mr Flis consents to the inclusion herein of the
matters based upon his information in the form and
context in which it appears.
FORWARD LOOKING STATEMENTS
As a result of a variety of risks, uncertainties and other
factors, actual events and results may differ materially
from any forward looking and other statements herein
not purporting to be of historical fact. Any statements
concerning mining reserves, resources and exploration
results are forward looking in that they involve
estimates based on assumptions. Forward looking
statements are based on management’s beliefs, opinions
and estimates as of the respective dates they are made.
The Company does not assume any obligation to update
forward looking statements even where beliefs,
opinions and estimates change or should do so given
changed circumstances and developments.
Page 5 of 13
Emu NL
New Gold Target Outlined at Jotahues Project
16 May 2018
JORC Code, 2012 Edition – Table 1 report, EMU NL
Jotahues soil sampling survey
Section 1 Sampling Techniques and Data
(Criteria in this section apply to all succeeding sections.)
Criteria
Explanation
Commentary
Sampling
techniques
Nature and quality of sampling (eg cut
channels, random chips, or specific
specialised industry standard measurement
tools appropriate to the minerals under
investigation, such as down hole gamma
sondes, or handheld XRF instruments, etc).
These examples should not be taken as
limiting the broad meaning of sampling.
Soil samples – a +2mm -6mm
screened sample consisting of
~1kg is collected in the field or, if
not possible, the required
screening is done in the
laboratory. For the Jotahues talus
samples, the material is generally
coarser.
Include reference to measures taken to
ensure sample representivity and the
appropriate
calibration
of
any
measurement tools or systems used.
Aspects
of
the
determination
of
mineralisation that are Material to the
Public Report. In cases where ‘industry
standard’ work has been done this would be
relatively simple (eg ‘reverse circulation
drilling was used to obtain 1 m samples
from which 3 kg was pulverised to produce
a 30 g charge for fire assay’). In other cases
more explanation may be required, such as
where there is coarse gold that has inherent
sampling problems. Unusual commodities
or mineralisation types (eg submarine
nodules) may warrant disclosure of detailed
information.
Drilling
techniques
All sample submissions for
drilling samples are crushed to
2mm, 800g split, pulverised and
150g, later 250g, shipped to
Intertek, Perth, for analysis.
Drill type (eg core, reverse circulation, n/a
open-hole hammer, rotary air blast, auger,
Bangka, sonic, etc) and details (eg core
diameter, triple or standard tube, depth of
diamond tails, face-sampling bit or other
type, whether core is oriented and if so, by
Page 6 of 13
Emu NL
New Gold Target Outlined at Jotahues Project
16 May 2018
what method, etc).
Drill
sample Method of recording and assessing core and n/a
recovery
chip sample recoveries and results
assessed.
Measures taken to maximise sample
recovery and ensure representative nature
of the samples.
Whether a relationship exists between
sample recovery and grade and whether
sample bias may have occurred due to
preferential loss/gain of fine/coarse
material.
Logging
Whether core and chip samples have been Soil description and depth of
geologically and geotechnically logged to a sample were logged.
level of detail to support appropriate
Mineral Resource estimation, mining
studies and metallurgical studies.
Whether logging is qualitative or
quantitative in nature. Core (or costean,
channel, etc) photography.
The total length and percentage of the
relevant intersections logged.
Sub-sampling
If core, whether cut or sawn and whether
techniques and quarter, half or all core taken.
sample
If non-core, whether riffled, tube sampled,
preparation
rotary split, etc and whether sampled wet or
dry.
For all sample types, the nature, quality and
appropriateness of the sample preparation
technique.
The samples collected are
representative of the in situ
material.
Sample sizes are appropriate to
the grain size of the material being
sampled.
Quality control procedures adopted for all
sub-sampling
stages
to
maximise
representivity of samples.
Measures taken to ensure that the sampling
is representative of the in situ material
Page 7 of 13
Emu NL
New Gold Target Outlined at Jotahues Project
16 May 2018
collected, including for instance results for
field duplicate/second-half sampling.
Whether sample sizes are appropriate to the
grain size of the material being sampled.
Quality
of The nature, quality and appropriateness of
assay data and the assaying and laboratory procedures
laboratory tests used and whether the technique is
considered partial or total.
All samples are digested using
25g aqua regia and analysed using
ICP-MS at Intertek’s laboratory in
Perth.
For geophysical tools, spectrometers,
handheld XRF instruments, etc, the
parameters used in determining the analysis
including instrument make and model,
reading times, calibrations factors applied
and their derivation, etc.
Soil samples - 9 elements are
reported including gold (0.1ppb
DL). Laboratory standards, blanks
and checks are also reported.
Nature of quality control procedures
adopted (eg standards, blanks, duplicates,
external laboratory checks) and whether
acceptable levels of accuracy (ie lack of
bias) and precision have been established.
Verification of The verification of significant intersections No drilling assay results at this
sampling and by either independent or alternative time.
assaying
company personnel.
The use of twinned holes.
No twinned holes.
Documentation of primary data, data entry All geochemical and geological
procedures, data verification, data storage data is loaded into databases
managed by independent third
(physical and electronic) protocols.
party entities for verification,
Discuss any adjustment to assay data.
storage and plotting. Assay data
are not adjusted.
Location
data points
of Accuracy and quality of surveys used to
locate drill holes (collar and down-hole
surveys), trenches, mine workings and other
locations used in Mineral Resource
estimation.
All samples are located using
hand held GPS accurate to < 5m.
WGS 84 UTM zone 19 south grid
system
Topographic control is deemed
adequate at this stage of the
Quality and adequacy of topographic exploration program.
Specification of the grid system used.
Page 8 of 13
Emu NL
New Gold Target Outlined at Jotahues Project
16 May 2018
control.
Data spacing Data spacing for reporting of Exploration The soil samples are generally
and
Results.
collected on a 100 x 100 m or 100
distribution
x 200 m grid.
Whether the data spacing and distribution is No mineral resources are being
sufficient to establish the degree of reported.
geological
and
grade
continuity
appropriate for the Mineral Resource and
Ore Reserve estimation procedure(s) and
classifications applied.
Whether sample compositing has been
applied.
Orientation of
data in relation
to geological
structure
Whether the orientation of sampling The controls on mineralisation are
achieves unbiased sampling of possible unknown at this time.
structures and the extent to which this is
known, considering the deposit type.
If the relationship between the drilling The controls on mineralisation are
orientation and the orientation of key unknown at this time.
mineralised structures is considered to have
introduced a sampling bias, this should be
assessed and reported if material.
Sample security The measures taken to ensure sample Management supervised sample
security.
collection and delivery to the
laboratory.
Audits
reviews
or The results of any audits or reviews of None undertaken.
sampling techniques and data.
Section 2 Reporting of Exploration Results
(Criteria listed in the preceding section also apply to this section.)
Criteria
Explanation
Mineral
Type, reference name/number, location
tenement
and and ownership including agreements or
land
tenure material issues with third parties such as
joint ventures, partnerships, overriding
Commentary
Emu has an option agreement
dated 14 November 2016 with
two Chilean companies, Prospex
SpA and BLC SpA, to acquire 8
Page 9 of 13
Emu NL
New Gold Target Outlined at Jotahues Project
16 May 2018
status
royalties, native title interests, historical concessions at Vidalita and 3
sites, wilderness or national park and concessions at Jotahues. This
environmental settings.
option maybe exercised any time
up until November 2019 by
The security of the tenure held at the time granting Prospex and BLC a 1%
of reporting along with any known NSR on production and allotting
impediments to obtaining a licence to them up to 15 million Emu
operate in the area.
ordinary shares subject to certain
vesting conditions (see ASX
release 15th November 2016).
Prospex SpA in turn has an option
to acquire 6 of the 8 Vidalita
concessions from local Chilean
parties. Under the terms of that
agreement, Prospex has the right
to exercise that option by
November 2019 by paying US$2
million and granting the Chilean
parties a 1% NSR over those 6
concessions. Under the Emu
option agreement, Emu has
assumed
the
rights
and
obligations of Prospex in relation
to those 6 concessions. The
option agreements are subject to a
5km AOI from the boundaries of
the 11 concessions. Since
entering
into
the
option
agreement with Prospex and
BLC, additional concessions have
been applied for and were
reported in subsequent ASX
releases.
Exploration
Acknowledgment and appraisal
done by other exploration by other parties.
parties
Geology
of Previous work was limited to
rock sampling.
Deposit type, geological setting and style of The project is a green fields
mineralisation.
exploration project and while the
source of the surface evidence of
mineralisation can only be
speculation at this stage, it is
likely to be similar to known high
sulphidation epithermal style ore
Page 10 of 13
Emu NL
New Gold Target Outlined at Jotahues Project
16 May 2018
deposits in the same geological
setting.
Drill
hole A summary of all information material to No drilling has been reported
Information
the understanding of the exploration
results including a tabulation of the
following information for all Material drill
holes:
easting and northing of the drill hole
collar
elevation or RL (Reduced Level – elevation
above sea level in metres) of the drill hole
collar
dip and azimuth of the holes, down hole
length and interception depths hole length.
If the exclusion of this information is
justified on the basis that the information is
not Material and this exclusion does not
detract from the understanding of the
report, the Competent Person should
clearly explain why this is the case.
Data
aggregation
methods
In
reporting
Exploration
Results, No drill assays at this time.
weighting averaging techniques, maximum
and/or minimum grade truncations (eg
cutting of high grades) and cut-off grades
are usually Material and should be stated.
Where aggregate intercepts incorporate
short lengths of high grade results and
longer lengths of low grade results, the
procedure used for such aggregation
should be stated and some typical examples
of such aggregations should be shown in
detail.
The assumptions used for any reporting of
metal equivalent values should be clearly
stated.
Page 11 of 13
Emu NL
New Gold Target Outlined at Jotahues Project
16 May 2018
Relationship
between
mineralisation
widths
and
intercept lengths
These relationships are particularly Project is at an early stage of
important in the reporting of Exploration exploration and any conclusions
Results.
at this stage would be speculation.
If the geometry of the mineralisation with
respect to the drill hole angle is known, its
nature should be reported.
If it is not known and only the down hole
lengths are reported, there should be a
clear statement to this effect (eg ‘down hole
length, true width not known’).
Diagrams
Appropriate maps and sections (with Not yet applicable – assays yet to
scales) and tabulations of intercepts should be received.
be included for any significant discovery
being reported. These should include, but
not be limited to a plan view of drill hole
collar locations and appropriate sectional
views.
Balanced
reporting
Where comprehensive reporting of all Not yet applicable – assays yet to
Exploration Results is not practicable, be received.
representative reporting of both low and
high grades and/or widths should be
practiced to avoid misleading reporting of
Exploration Results.
Other
substantive
exploration data
Other exploration data, if meaningful and
material, should be reported including (but
not limited to): geological observations;
geophysical survey results; geochemical
survey results; bulk samples – size and
method of treatment; metallurgical test
results; bulk density, groundwater,
geotechnical and rock characteristics;
potential deleterious or contaminating
substances.
Further work
The nature and scale of planned further Extension of the surface sampling
work (eg tests for lateral extensions or and follow-up drilling is being
depth extensions or large-scale step-out considered but not yet planned.
drilling).
Surface rock and tallus sampling
was undertaken at opportune
locations where outcrop allowed
and appropriate. Summary maps
are included. Assay methodology
is described above.
Diagrams clearly highlighting the areas of
Page 12 of 13
Emu NL
New Gold Target Outlined at Jotahues Project
16 May 2018
possible extensions, including the main
geological interpretations and future
drilling areas, provided this information is
not commercially sensitive.
Page 13 of 13
Share your feedback
Discover