Yataga Valley Drilling Advances, Next Exploration Targets
Released
Released
Announcement PDF
www.emunl.com.au
info@emunl.com.au
U3, 180 Main Street
KANGAROO POINT QLD 4169
ASX Code: EMU
ABN: 50 127 291 927
ASX RELEASE | ASX:EMU
Yataga Valley Drilling Advances
Copper Model and Defines Next
Exploration Targets
17 November 2026
EMU NL (“EMU” or “the Company”) is pleased to provide a technical update on its recently
concluded reverse circulation (RC), diamond drilling (DD) and target development programme at
the Yataga Valley Copper Project in North Queensland.
HIGHLIGHTS:
2026 Yataga Valley exploration drilling completed across 20 holes for 4650.70 m, comprising
2940.40 m reverse circulation (RC) and 1710.30 m diamond drilling (DD).
Drilling and concurrent mapping support key elements of a copper-bearing intrusive and
hydrothermal system, strengthening the geological basis for targeted follow-up exploration.
RC/Diamond Hole 26YVRD012 returned a whole-hole weighted average of 285 ppm Cu
(0.0285% Cu), or approximately 10 times the average background Cu-values in a granodiorite
host rock1
. Selected narrow vein and shear samples exceed 1% Cu.
Gossan-bearing hydrothermal breccias and intersecting quartz veins at Fiery Creek, Greisen
Hill and at least four other locations near 26YVRC008 and 26YVRC009 define specific settings
for follow-up exploration.
More than 1,500 rock samples, together with drilling and assays, have significantly improved
the geological control and the basis for ranking copper-silver targets within the approximately
70 km² Yataga Intrusive Complex.
Assays have been received for 16 of the 20 holes, with results from these diamond drilling
holes expected by end December 2026, subject to laboratory turnaround. Interpretation and
target development continue as results arrive.
Copper and gold exploration continues across EMU’s approximately 850 km² Georgetown
project, including gold field activities and identification and maturation of new prospective
opportunities.
EMU NL (ASX: EMU) is pleased to report completion of its 2026 Yataga Valley exploration drilling
programme and progress in defining the next phase of exploration across its Georgetown project in
North Queensland. Drilling and field mapping programmes have advanced the geological model
and identified vein, gossan-bearing breccia and structural settings for targeted follow-up. The final
exploration hole of the Yataga Valley drilling programme was completed on 26 October 2026.
Drilling, assays and surface mapping support key elements of a copper-bearing intrusive and
hydrothermal system. Dr Gregg Morrison’s preliminary interpretation links the broad surface
copper anomaly with elevated copper in the drilled rocks, while stronger values occur in
1
Berkman, D. A., (2001); Average Abundance of Selected Minor Elements in the Earth’s Crust. (Monograph No 9)
Field Geologist’s Manual - The Australian Institute of Mining and Metallurgy
Page | 2
structurally controlled and localised green veins and shears. This provides a concise geological
framework for targeting sites where mineralising fluids may have concentrated copper.
Results received to date are generally low in tenor, with stronger copper values confined to
localised intervals. The next exploration objective is to establish whether the identified vein,
breccia and structural settings host higher-grade zones with greater width and continuity.
MANAGING DIRECTOR & CEO DOUG GREWAR COMMENTED:
“This year’s programme has improved our understanding of Yataga’s large copper–silver system
and identified several areas for follow-up. The geochemical assay results received for Hole 12 help
explain the broad surface copper anomaly with disseminated sulphides commonly in miarolitic
cavities, whilst the moderate to high grade values are localised within structural sites and vein
zones. Our project-wide rock review has also identified more occurrences of gossan-bearing
breccias and quartz veins than initially recognised, giving us specific target models for future
investigation.
Over the 2026-2027 wet season, we’ll integrate the geological observations and outstanding
assays to plan follow-up mapping, sampling and target ranking. The results of that work will guide
the design of the next drilling programme. Copper and gold exploration will continue across our
850 square kilometre Georgetown project.”
HOLE 26YVRD012 LINKS COPPER MINERALISATION WITH THE GEOLOGICAL
MODEL:
Hole 26YVRD012 tested a deep-seated induced polarisation (IP) chargeability anomaly to a total
depth of 735.40 m. It intersected multiple intrusive phases, alteration, quartz veins, sulphide-
bearing cavities and green shear–vein structures. The IP anomaly is interpreted to be associated
with a combination of sulphide mineralisation, alteration and quartz-sulphide veining. Geological
logging identified a broad structural envelope around green shear veins extending 156 m downhole
(320–476 m) (see Figures 1 and 2).
A review of assays for the complete hole 26YVRD012 reports a weighted average of 285 ppm Cu,
almost 10 times the average or background value of copper in a granodiorite host rock (such as a
non-mineralised section of the Yataga Pluton). The elevated copper encountered in the hole is
consistent with the broader surface soil Cu anomaly. The 156 m downhole green-vein structural
envelope averages 573 ppm Cu and 2.3 ppm Ag. Within this envelope, spaced sheeted veins occur
through a 22.85 m downhole geological interval averaging 904 ppm Cu and 2.9 ppm Ag. There are
56 individual samples reported at ≥0.1% Cu and 14 individual samples reported at ≥0.3% Cu. The
density of sheeted veins and the presence of breccias are interpreted as controls on Cu-Ag
mineralisation and the locally higher grades reported within the broader low-tenor envelope (see
the Summary Table 1 and the Table of Significant Intervals in Appendix 1).
Page | 3
Figure 1 – Detailed view of mineralised core in 26YVRD012. Two narrow shear-controlled “Green
Vein”intervals show brecciated quartz and sulphide overprint: 0.25 m at 2.04% Cu from 344.55 m
and 0.25 m at 1.26% Cu from 347.00 m. Reported lengths are downhole; true widths are not yet
known. 2
Figure 2 – Drill Section 4500N. This E-W section shows drillhole 26YVRD012 with a laboratory Cu
assay histogram plotted against the IP chargeability model. Three interpreted vein/structural zones
(Aplite Sill/ Middle Vein Zone & Lower Vein Zone) are shown in relation to the moderate IP
chargeability anomaly on this section line.
2
Assay grades are shown in ppm except as stated in %
Page | 4
Table 1: Drillhole 26YVRD012 Summary Table
GOSSAN-BEARING BRECCIAS AND QUARTZ VEINS DEFINE FOLLOW-UP
TARGETS:
Surface mapping and the continuing rock sample review have identified new gossan-bearing
hydrothermal brecciasand quartz veins at Fiery Creek, Greisen Hilland atleastfourother locations
near 26YVRC008 and 26YVRC009 (See Figure 3). Their structural settings and relationships to
intrusive contacts provide specific opportunities to investigate pathways and sites of
mineralisation.
The ongoing geological review has recognised the importance of breccias and quartz veins
containing gossanous infill (interpreted to have formed from the decomposition of sulphides), in
more specimens than initially appreciated. Similar samples from Fiery Creek include those with
the strongest copper and silver values in the reviewed sample set. This makes the gossan-bearing
breccias and veins a priority for systematic mapping and sampling. The overall distribution, metal
tenor and relationship to mineralisation-controlling structures intersected in drilling are currently
being evaluated.
In the areas peripheral to holes 26YVRC008 and 26YVRC009, new mapping has identified quartz-
rich and silicified zones of aplites and granodiorites with intersecting vein sets. A major north-
northwest-trending quartz lode west of 26YVRC008 is interpreted as a possible continuation of the
eastern bounding fault of Yataga Valley. Gossans, cross-cutting veins and brecciation at vein
intersections will guide follow-up mapping, sampling and structural assessment.
Ongoing review of cut rock samples, sample photographs and field observations will refine the
relationships between brecciation, quartz veins, iron oxides, intrusive phases and copper–silver
mineralisation. The work will rank geological settings for focused testing of higher-grade potential.
Page | 5
Figure 3 - Rock chip sample YV590 (location 774638E/ 8001312N)
Sample shows a breccia of altered host rock (granodiorite) and quartz veins with cavities filled
with new quartz crystals and Cu-Pb Ag oxide gossan.3
A SUBSTANTIAL INTRUSIVE COMPLEX FOR SYSTEMATIC EXPLORATION:
The Yataga Intrusive Complex covers approximately 70 km² and hosts a surface copper–silver
geochemical anomaly measuring approximately 8 x 3 km. The 2026 drilling and mapping campaign
significantly improved the understanding of the geology in the areas investigated and strengthened
the basis for ranking targets.
The 2026 programme has given EMU a clearer basis for targeting higher-grade copper and silver at
Yataga. Dr Gregg Morrison interprets the widespread, low-tenor copper mineralisation as helping
to explain the broad surface copper anomaly, while stronger copper assays from narrow green
shears and veins in Hole 26YVRD012 show that copper is locally concentrated within the system.
Surface mappingand rockreview havealso identifiedmoreoccurrencesofgossan associated with
hydrothermal breccias and quartz veins than previously recognised. The gossans are interpreted
as weathered expressions of former sulphides. At Fiery Creek, specimens with similar textures
include some of the strongest copper and silver assays in the reviewed sample set, giving EMU a
geological basis for following up these features elsewhere.
3
Based on pXRF recordings and the identification of green cuprite plumbo-jarosite and yellow green scorodite,
jarosite as well as Fe oxides.
Page | 6
Priority follow-up exploration is necessary at Greisen Hill, in the area around drill holes
26YVRC008 and 26YVRC009, and at four other anomalies examined during the 2026 field
programme. Detailed structural mapping, systematic rock and targeted soil sampling, and
assaying will help establish how the gossans, breccias and quartz veins relate to the structures
that localise higher grades of copper and silver. This work is central to the next phase of
exploration. It will allow EMU to rank the new target areas and design drilling to test whether
higher-grade mineralisation extends over greater widths and with greater continuity than observed
to date.
Therefore, the next phase at the Yataga Intrusive Complex will focus on detailed geological and
structural mapping, systematic rock chip and soil sampling and the interpretation of their
geochemical assays. EMU will integrate the results with existing drilling and mapping data to rank
targets and guide the design of the next field campaign and drilling programme.
DRILLING COMPLETION AND ASSAY STATUS:
The2026 YatagaValleydrillingcampaigncomprised17 RCholes,twoextendedwithdiamondtails,
and three diamond holes drilled from surface. The final exploration hole, 26YVDD020, was
completed to 311.6 m.
Table 2: Drilling Totals (m):
Assays havebeen received for 16 of the 20 holes. Outstandingdiamond drill assay results for holes
26YVRD015, 26YVDD018, 26YVDD019 and 26YVDD020, representingapproximately 1,206 m are
expected by the end of December 2026, subject to laboratory turnaround. Each batch will be
assessed against the evolving geological model as it becomes available. Like other resource
companies, Emu has also been impacted by delays in laboratory turnaround timing in its assay
results.
The 2026 programme was progressively refined from the initial 2026 plan to drill up to 10,000 m as
new drill data and the concurrent geological mapping were processed improving and refining target
definition. EMU reduced further drilling in response to the latest geological data and
interpretations, resulting in a more focussed and shorter drill programme. With respect to the
drilling productivity of the 2026 campaign, it can be seen that a larger component of diamond
drilling relative to RC drilling in the campaign produced slower overall drilling rates. Emu also
encountered drillingrig breakdownsand crew constraints which also a ected programme delivery.
Page | 7
Completing the campaign ahead of the wet season and conserving cash were further prudent
decision points.
COPPER AND GOLD EXPLORATION CONTINUES ACROSS GEORGETOWN:
EMU continuescopper and goldexplorationacross itsapproximately850 km² Georgetownproject.
Field activitiesoverthegoldprospectsare ongoing,whileinterpretationofthestructuralframework
is identifying additional prospective gold settings within the tenements. This provides a parallel
exploration focus alongside the Yataga Valley copper silver review and other copper prospects
within the tenement package.
Field validation and systematic geological assessment will guide and improve the ranking of these
emerging gold opportunities and the selection of areas for further work. The prospects remain
early-stage and require systematic exploration.
NEXT STEPS AND 2027 EXPLORATION PROGRAMME:
Dr Gregg Morrison and the technical team are integrating geochemical assays, drill logs, structural
observations, surface mapping and geophysics to refine the Yataga Valley geological model and
prioritise follow-up areas.
Next steps as follows:
Late November 2026: Complete the initial geological compilation and assess the controls
on copper mineralisation.
November–December 2026: Continue the rock sample review and prioritise follow-up at
Fiery Creek, Greisen Hill and in at least four areas near drill holes 26YVRC008 and
26YVRC009.
December 2026–January 2027: Incorporate the outstanding diamond drill assays,
expected by the end of December subject to laboratory turnaround, and refine the
geological interpretation over the wet season.
2027 field programme: Begin with detailed geological and structural mapping of the newly
recognised gossan-bearing hydrothermal breccias and quartz vein zones, supported by
systematic rock sample collection and soil sampling over new target zones. Integrate the
assay results with mapping and existing drill data to rank targets and design the next drilling
programme. Assessment of the greater Georgetown Project gold prospects across the
three tenements will continue in parallel.
Page | 8
COMPETENT PERSONS STATEMENT:
The information in this report that relates to Exploration Results is based on, and fairly represents,
information and supporting documentation compiled by Francisco Montes, a Competent Person
who is a Member of the Australian Institute of Geoscientists. Mr Montes is a consultant for EMU
NL and has su icient experience relevant to the style of mineralisation and type of deposit under
consideration, and to the activity being undertaken, to qualify as a Competent Person as defined in
the 2012 Edition of the Australasian Code for Reporting of Exploration Results, Mineral Resources
and Ore Reserves. Mr Montes consents to the inclusion in the report of the matters based on his
information in the form and context in which they appear.
AUTHORISED FOR RELEASE BY THE BOARD
For further information, please contact:
Doug Grewar
MD and Chief Executive O icer
info@emunl.com.au
Investors can sign into our interactive investor hub and join in on the
conversation with Emu NL.
https://investorhub.emunl.com.au/auth/signup
Page | 9
APPENDICES:
Appendix 1
Table 3: Drill Collars – Yataga Valley Drill Programme: Holes Completed
Page | 10
Table 4: Significant Intervals (Cu > 0.3%)
Table 5: Significant Intervals (Cu > 0.1%)
Page | 11
Page | 12
Appendix 2: JORC Code, 2012 Edition – Table 1 Report Template
Section 1: Sampling Techniques and Data
(Criteria in this section apply to all succeeding sections.)
Criteria JORC Code explanation Commentary
Sampling
techniques
Nature and quality of sampling (eg cut channels, random
chips, or specific specialised industry standard measurement
tools appropriate to the minerals under investigation, such as
down hole gamma sondes, or handheld XRF instruments,
etc). These examples should not be taken as limiting the
broad meaning of sampling.
Include reference to measures taken to ensure sample
representivity and the appropriate calibration of any
measurement tools or systems used.
Aspects of the determination of mineralisation that are
Material to the Public Report.
In cases where ‘industry standard’ work has been done this
would be relatively simple (eg ‘reverse circulation drilling was
used to obtain 1 m samples from which 3 kg was pulverised to
produce a 30 g charge for fire assay’). In other cases more
explanation may be required, such as where there is coarse
gold that has inherent sampling problems. Unusual
commodities or mineralisation types (eg submarine nodules)
may warrant disclosure of detailed information.
Reverse Circulation Drilling Sampling
17 RC Reverse Circulation (RC) holes for a total of 2940.40m, with hole
depth ranging from 77m to 251m drilled from the surface.
Assay results have been received for all 17 RC holes.
RC Sampling was carried out under EMU NL protocols and
QAQC procedures as per industry best practice.
All RC samples were drilled using a 5 ½ inch diameter hammer with
samples collected nominally as 4m composites over the entire drillhole
except for zones of stronger potential mineralisation which were
collected in 1m intervals.
All sample bags contained 2.5 – 3.0kg of RC drill cuttings for both 1m
and 4m composite samples and were submitted to laboratory for sample
preparation and analysis.
Samples were crushed to a target of 70% passing 2mm, riffle split and
pulverised to a target of 85% passing 75um. Pulp samples assayed in-
house (Intertek Townsville) or dispatched regional hub (ALS Townsville).
If warranted and based on anomalous laboratory assay results of 4m
composite samples, additional individual 1m samples were collected
and stored for future laboratory analysis.
Diamond Drilling Sampling
A total of 2 diamond tails were completed in RC pre-collars (drillholes
26YVRD012 & 26YVRD015) for a total of 907.7m. Maximum hole depth
reached 735.4m.
Additional to this, 3 complete diamond holes (26YVDD018, 26YVDD019
& 26YVDD020) were drilled from surface for a total of 802.9m, with
Page | 13
Criteria JORC Code explanation Commentary
maximum DD hole reaching 311.60m (26YVDD020).
Complete laboratory assay results have been returned for only for DD
hole 26YVRD012.
Assay results remain pending for DD holes 26YVRD015, 26YVDD018,
26YVDD019 and 26YVDD020, and are consequently not discussed in
this announcement.
All DD core sampling was carried out under established EMU NL
protocols and QAQC procedures as per industry best
practice.
All drill core was oriented, logged for geology (lithology/ alteration/
mineralisation), structure (structures/ veins α-/ β- angles), and
photographed whole prior to cutting. Half-core photos were also taken
post-cutting.
In DD hole 26YVRD012, the core was sampled in nominal 1m sample
intervals. A limited number of mineralised intervals were sampled within
geological boundaries to a minimum 0.15m interval. Similarly, a limited
number of samples in non-mineralised intervals were collected in 2m
intervals.
Sample lengths range between a minimum 0.15m and a maximum
2.0m.
Drilling
techniques
Drill type (eg core, reverse circulation, open-hole hammer,
rotary air blast, auger, Bangka, sonic, etc) and details (eg core
diameter, triple or standard tube, depth of diamond tails, face-
sampling bit or other type, whether core is oriented and if so,
by what method, etc).
RC and DD drillholes were completed by Eagle Drilling using an DE 710
Sandvik multi-purpose track-mounted rig with on board compressor
350psi and 1100cfm. Eagle Drilling’s equipment also included a trailer-
mounted Air Research booster rated at 500psi.
The RC holes were all completed with a 5½ inch hammer diameter and
the DD holes were completed with HQ (63.5mm or 2.5” diameter) core
through the upper weathered regolith and fractured horizons, changing
to NQ2 (50.5mm or 2.0” diameter).
Only diamond tails have been drilled with a standard tube and hole, with
26YVRD012 started at 230.40m and 26YVRD015 at 158.40m.
All core has been orientated using a Axis © core orientation tool at the
Page | 14
Criteria JORC Code explanation Commentary
end of each 3m run (whilst using the 3m barrel), and later at 6m
intervals when the drilling was modified to use a 6m barrel). These
changes were implemented in consideration of the depth of hole
26YVRD012. This 6m configuration was similarly used in hole
26YVRD015.
Downhole surveys were routinely conducted with an Axis © Gyroscope
Camera. Whilst drilling was underway, single shots were completed
every 30m to track the drill string. After completion of drilling, a
continuous survey is conducted with readings taken with the probe in
both the down hole (in) and up hole (out) directions every 5m and
averaged. .
Drill sample
recovery
Method of recording and assessing core and chip sample
recoveries and results assessed.
Measures taken to maximise sample recovery and ensure
representative nature of the samples.
Whether a relationship exists between sample recovery and
grade and whether sample bias may have occurred due to
preferential loss/gain of fine/coarse material.
RC sample recovery was visually assessed by bulk sample weight and
volume and was consistent through the program.
The sample weights were visually checked for each of the A-samples
(main green sample bag), B-sample (calico bag sample) and for the 4m
composite sample.
The samples were taken from a cyclone with splitter. The A-sample was
deposited into green bags directly from cyclone and a B-sample was
split off the cyclone and placed into calico bags.
The 4m composite samples were collected with a spear with equal
sample proportions from each of the individual 1m samples (A-samples
in green bags), then placed into a calico bag of approximately 2.5-3.0
kg.
No relationship between sample recovery and grade is known at this
stage.
Logging Whether core and chip samples have been geologically
and geotechnically logged to a level of detail to support
appropriate Mineral Resource estimation, mining studies
and metallurgical studies.
Whether logging is qualitative or quantitative in nature.
All RC and diamond holes have been logged in detail. Emu NL’s RC
and DDH logging sheet contains the following tables:
Collar, Survey, Events, Weathering, Regolith, Lithology, Alteration,
Mineralisation, Veins, Structures, MagSus (magnetic susceptibility
readings), pXRF, Sampling and Sampling Cut Sheet.
Page | 15
Criteria JORC Code explanation Commentary
Core (or costean, channel, etc) photography.
The total length and percentage of the relevant
intersections logged.
All RC chips and diamond core were logged to lithological boundaries
and key structures with the recording of data on a Panasonic
ToughBook© laptop computer at the rig, and in the Georgetown
dedicated core yard.
All logging was completed on Microsoft Excel spreadsheets, which was
subsequently uploaded to the company’s cloud-based database.
Geological logging is qualitative in nature whilst pXRF and magnetic
susceptibility (“mag-sus”) results are quantitative.
Sub-sampling
techniques
and sample
preparation
If core, whether cut or sawn and whether quarter, half or
all core taken.
If non-core, whether riffled, tube sampled, rotary split, etc
and whether sampled wet or dry.
For all sample types, the nature, quality and
appropriateness of the sample preparation technique.
Quality control procedures adopted for all sub-sampling
stages to maximise representivity of samples.
Measures taken to ensure that the sampling is
representative of the in situ material collected, including
for instance results for field duplicate/second-half
sampling.
Whether sample sizes are appropriate to the grain size of
the material being sampled.
All diamond core was half sawn using a diamond core saw by company
contractors and closely monitored by the company geologist(s).
Sampling was undertaken from the left-hand side, (5mm) above the
Orientation Line (i.e., the red orientation line marked in the downhole
surveys). If no orientation line was marked, a new blue cut line was in
placed by the geologist. The sample side was consistently the left-hand
side downhole side, which was placed into the individual calico bags
and then sealed in polyweave bags for dispatch to the laboratory.
The minimum samples length (size) was 15cm, and the maximum taken
was 200cm.
Samples were selected and sampled within the same lithological
boundary to remove any contamination of more favourable mineralised
zones. On occasions smaller units were included in a main host.
For RC drilling the cyclone sample was deposited into the A-sample
(green bags) directly from cyclone and a B-sample was split off the
cyclone and placed into calico bags. This ensured a high-quality sample
and no contamination.
The 4m composite samples were taken from the green bags using a
spear with even amounts to make up the 4m composite.
The majority of samples were dry and on the few occasions where the
sample was wet, if sample volume and quality was deemed to be
compromised, the hole was stopped immediately.
To ensure sample quality and representation of the sample, (a) copper
Page | 16
Criteria JORC Code explanation Commentary
Cu-Standards (CRM’s), (b) Blanks and (c) Duplicates were placed at
intervals of 20 samples (1:20). These QA/QC parameters were utilized
for both RC and diamond drilling methods.
The sample size is considered appropriate for the material being
sampled.
Quality of
assay data
and
laboratory
tests
The nature, quality and appropriateness of the assaying
and laboratory procedures used and whether the
technique is considered partial or total.
For geophysical tools, spectrometers, handheld XRF
instruments, etc, the parameters used in determining the
analysis including instrument make and model, reading
times, calibrations factors applied and their derivation,
etc.
Nature of quality control procedures adopted (eg
standards, blanks, duplicates, external laboratory checks)
and whether acceptable levels of accuracy (ie lack of
bias) and precision have been established.
Diamond Drilling (DD) Sampling
All DD samples were submitted to ALS in Townsville for sample
preparation, with sample pulps subsequently dispatched to ALS
Brisbane for sample analysis.
All samples were dried, crushed, pulverised, and split to
produce a sub-sample (pulp) for laboratory analysis.
Each pulp underwent a 4-acid digestion (using hydrochloric, nitric,
perchloric, and hydrofluoric acids) which is considered a "near-total"
digestion to completely break down and dissolve the vast majority of
rock-forming, sulphide, and oxide minerals for multi-element analysis
Sample analysis was completed with ALS method ME-MS61 (4-acid
digest with ICP-MS finish on a suite of 48 elements (Ag, Al, As, Ba, Be,
Bi, Ca, Cd, Ce, Co, Cr, Cs, Cu, Fe, Ga, Ge, Hf, In, K, La, Li, Mg, Mn,
Mo, Na, Nb, Ni, P, Pb, Rb, Re, S, Sb, Sc, Se, Sn, Sr, Ta, Te, Th, Ti, Tl,
U, V, W, Y, Zn and Zr).
Reverse Circulation (RC) Drilling Sampling
All RC samples were submitted to Intertek in Townsville for
preparation and analysis.
All samples were dried, crushed, pulverised, and split to
produce a sub-sample (pulp) for laboratory analysis.
Each pulp underwent a 4-acid digestion (using hydrochloric, nitric,
perchloric, and hydrofluoric acids) as per the DD-samples.
Sample analysis was completed with Intertek method 4A/MS48 (4-acid
digest with ICP-MS finish on a suite of 48 elements (Ag, Al, As, Ba, Be,
Bi, Ca, Cd, Ce, Co, Cr, Cs, Cu, Fe, Ga, Ge, Hf, In, K, La, Li, Mg, Mn,
Mo, Na, Nb, Ni, P, Pb, Rb, Re, S, Sb, Sc, Se, Sn, Sr, Ta, Te, Th, Ti, Tl,
U, V, W, Y, Zn and Zr).
Page | 17
Criteria JORC Code explanation Commentary
QAQC on DD- & RC-Samples
On the return of laboratory assay results all CRMs were checked and
validated for laboratory accuracy.
These QAQC samples were submitted at a rate of 1:20 (i.e., at every 20,
40, 60, 80, 100 sample intervals) and is considered sufficient for QAQC
purposes. These included OREAS standards (CRM), OREAS blanks
and sample duplicates. Laboratory QAQC results were also reviewed to
ensure internal Intertek/ALS laboratory QAQC also passed standards.
Verification of
sampling and
assaying
The verification of significant intersections by either
independent or alternative company personnel.
The use of twinned holes.
Documentation of primary data, data entry procedures,
data verification, data storage (physical and electronic)
protocols.
Discuss any adjustment to assay data.
Significant drill intersections have been verified by members of the EMU
NL geology team and consultants.
All drill logging was entered directly into a Panasonic© Toughbook
computer using the company logging forms and protocols on Excel
spreadsheets. The Emu logging system uses standard look-
up tables that does not allow invalid logging codes to be
entered. Further data validation is carried out during
upload to EMU NL master database which is controlled by a specialist
consultant.
No adjustments or calibrations have been made to any laboratory assay
data collected.
Location of
data points
Accuracy and quality of surveys used to locate drill holes
(collar and down-hole surveys), trenches, mine workings
and other locations used in Mineral Resource estimation.
Specification of the grid system used.
Quality and adequacy of topographic control.
All drilling and data collection was preferentially taken in the
GDA94/MGA Zone 54 datum using a Garmin GPS and Samsung tablet
with Discover Mobile app. Accuracy is within +/- 3m
After the completion of the entirety of the drilling programme, it is
anticipa
Share your feedback
Discover